Shanxi NLD Imp & Exp Industries Inc.
Main products:Flange,Steel Pipe,Fittings,Machining,Forged
Products
Contact Us
  • Contact Person : Mr. Guan Gavin
  • Company Name : Shanxi NLD Imp & Exp Industries Inc.
  • Tel : 86-351-8336918
  • Fax : 86-351-8336916
  • Address : Shanxi,Taiyuan,2-1110#(CHANG FENG HUA JUAN)NO.918,BUILDING 9,TIYUE WEST ROAD,XIAODIAN AREA,TAIYUAN
  • Country/Region : China
  • Zip : 030001

erw welded steel pipe

erw welded steel pipe
Product Detailed
erw welded steel pipe 1).WT:1.2-60mm 2).OD:21.3-610mm 3).Lengh:4-12m

ERW welded steel pipe:

Specification:

1>API 5L, ASTM A252, GR.B TO X70, GR.1 GR.2 GR.3 2>OD: 219.1 - 4064mm (8" - 160")

3>WT: 3.2 - 25.4mm,LT: 6-18mtr

Quality standard:API 5L Gas and petroleum pipelinesGB/T9711 Petroleum and natural gas industries--Steel pipe for pipelinesSY/T5037 Spiral submerged arc-welded steel pipe for pipelines for low pressure field fluid serviceSY/T 5040 Spiral submerged arc-welded steel pipe pilesCJ/T 3022 Spiral submerged-arc welded steel pipe for municipal heat supplyIS : 1978 Steel tubes for use in transportation of oil; gas & Petroleum productsASTM A252 WELDEDAND SEAMLESS STEEL PIPE PILESB534, BS 3601 DIN 1626, DIN 2460,TS1997, UNI 6363, AWWA C-200

Steel GradeQ195, Q215, Q235, Q275, Q295, Q345, 08F, 08, 08AL, 08F, 10F, 10, HG5, DF08 SPHC, M8S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St12, St13, St14, St33,St37, St44, ST52ASTM A 53: Gr. A, Gr B, Gr C, Gr.DAPI 5L: A, B, X42, X46, X52, X56, X60, X65 X70GB/T9711: L175, L210, L245, L290, L320, L360, L290, L320, L360, L390, L415, L450, L485, L555ASTM A252: Gr.1 Gr.2 Gr.3Size range:Outer Diamter: 219.1mm - 4064mm (8" - 160")Wall Thickness: 3.2 mm - 25.4mmLength: 6mtr-18mtrcoating and lining:Outside coating:Anti-rust oil, black painting.Epoxy Coating according to AWWA C-210Bitumen Coating according to DIN30672, BS534Coal- Tar Enamel Coating according to AWWA C-2033 Layer polyethylene Coating according to DIN306703 Layer Polypropylene Coating according to DIN30678Inside lining:Epoxy lining according to AWWA C-210Bitumen Lining according to DIN30673, BS534Coal-Tar Enamel Lining according to AWWA C-203Cement Mortar Lining according to AWWA C-205, BS534Joint details:Welded joint: The most widely used type for the joining of steel pipes. Steel pipe is relieved with bevelled ends which are made with special equipment in compliance with the relevant stanards.Spherical socket joint: provides the possibility of a rotation 10 degrees at the pipeline without the utilization of any special fittings. Steel pipes are welded from outside after proper erectioning according to required angle.Spigot and socket joint: Wspecially used for the steel pipes inside coated with cement mortar. Steel pipes are welded from outside after erectioning.Flanged joint: The special manufactured flanged are welded to the ends of the pipe and then jointed with bolts.Test:Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties ( Bending Test, Blow Test, Impact Test), ExteriorSize Inspection, Hydrostatic Test, X-ray Test.Mill Test Certificate:EN 10204/3.1BThird party inspection:SGS, BV, Lloyds etc.

erw welded steel pipe



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.